Einleitung

Is the sound being produced by the radar staticky or no sound is being produced at all? If so, follow these steps to replace your radar's speakers.

  1. MlYNlfLwIqFInckN
    • Remove the three 1.2 mm Phillips #1 screws on the back of the device.

  2. q3KytcKK2BDUo1Uy
    • Pry off the back panel of the radar using the nylon spudger.

  3. geeeaVKAQIaZjCI2
    geeeaVKAQIaZjCI2
    bhmcLFSNZFyHQ3Fs
    • Carefully unplug the speaker wire from the motherboard.

  4. qVusKPEeRW1svyi1
    • Pull the speaker holder out of the motherboard.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Kennedy Morales

Mitglied seit: 20/10/17

655 Reputation

0 Kommentare