Einleitung

If the Passport Max2's lens gets cracked or damaged, this guide will communicate how to replace it.

  1. RND4wDSsOGehEDM1
    RND4wDSsOGehEDM1
    4vr5umwpvjOkbrl2
    • Inser the flat end of a spudger into one of the two notches and pry off the case.

  2. QQIkFZ1kjLMRUIQU
    QQIkFZ1kjLMRUIQU
    QDJ2XiqjlXYcrnpP
    • Slide the spudger around the perimeter of the radar housing until the case separates.

  3. r6NEaLNTx1F2V2KM
    r6NEaLNTx1F2V2KM
    wMwGklQnRQOD2En5
    • Repeat these steps to remove the other side.

  4. yLNLbNUrIWvG2xbQ
    yLNLbNUrIWvG2xbQ
    HaakxkfMk1O2fUJw
    • Remove the four 9mm Phillips #1 screws from the bottom of the radar.

    • Remove the bottom case.

  5. DosUPHDcmGYaUKRu
    • Gently spread apart the thin silver frame that wraps around the device and remove the dark purple lens.

    • The silver frame can easily pop off of the device now that the bottom metal case has been removed. Don't worry if it comes off all the way. It can easily be put back in it's place.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Kelsey Ferrenberg

Mitglied seit: 12/04/18

710 Reputation

Ein Kommentar

Where can I buy a replacement lens?

Kit -