Farberware FSTO100 Door Handle Replacement

Geschrieben von: Jack Cate
  • Kommentare: 1
Farberware FSTO100 Door Handle Replacement

Schwierigkeitsgrad

Very easy

Schritte

4

Zeitaufwand

5 Minuten

Einleitung

Use this guide to glue the door handle back to its original position so that it is possible to open the door.

  1. Sk2FHJCQpYSUecga

    • The door handle may fall off if overused or not glued properly.

  2. hd6PHMSD3JuYHuVx

    • Apply glue to the inside of the bracket on the handle.

    Hi, a question for you. It is about the glue, is it a special one or with some specific active principle/ingridient ? The reason to ask is due to the heat from the owen. Thanks in advance.

    Antonio -

  3. eAkjvLxjK4wMRZP6

    • Replace the handle in its original position on the door.

  4. aLj1pnMDDRGTiA1J

    • Hold firmly for a minute to allow glue to properly set.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Jack Cate

Mitglied seit: 19/10/12

35 Reputation

0 Kommentare