Fitbit Alta HR Battery Replacement

Geschrieben von: Wendy Sato
  • Kommentare: 3
Fitbit Alta HR Battery Replacement

Schwierigkeitsgrad

Moderate

Schritte

9

Zeitaufwand

1 - 2 Stunden

Einleitung

This is a guide to replace the battery in the Fitbit Alta HR fitness tracker.

  1. igLmmtH1XpY6Edpf
    igLmmtH1XpY6Edpf
    FPE2XPBGLlNAPaFm

    • Push in the clip and slide off the strap from each side.

  2. hXNJZsEU1vsbAZPR

    • Use a spudger to remove the front cover.

    For me the Displaycover was very tight closed. Plectron or Plastic-Pryingtool didnt work. I hat to use as Razorblade to lift the Cover for the first tiny bit.

    Grodahn -

  3. NoAdNoDXDMO2sdN2

    • Use a spudger to lift the display.

    The display is glued to a frame on the mainboard. Lift the display VERY carefull! It is thin and glued in place well! Take your time!

    Grodahn -

  4. lUEw1YDtSBAV1RAp

    • Use a spudger to disconnect the cable that connects the heart rate monitor to the motherboard.

  5. ZyPAoY4OeZpKVAGB

    • Use a hex 0.7 screwdriver to remove the screws from the motherboard.

  6. 4LBtmK6u2esW1ViS
    4LBtmK6u2esW1ViS
    Ho23Chjs2RTcPJL1

    • Use a spudger to lift the motherboard.

  7. I64fo6sRJYyc4oTf

    • Use a spudger to lift the battery.

    • When the battery is lifted, the connected components (display, motherboard, battery) will come out.

    • Use a soldering iron to desolder the two battery contacts from the motherboard.

    • Ensure positive and negative wires are in the correct positions. There are + and – signs on the motherboard. Red is positive. Black is negative.

    • Use a soldering iron and lead-free solder to solder the new battery to the motherboard.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Wendy Sato

Mitglied seit: 13/11/16

229 Reputation

Ein Kommentar

No work no on

deepakkumar8529575607 -