FoodSaver V4980 Bottom Panel Replacement

Geschrieben von: Mackenzie Grossgold
  • Kommentare: 1
FoodSaver V4980 Bottom Panel Replacement

Schwierigkeitsgrad

Easy

Schritte

2

Zeitaufwand

5 Minuten

Einleitung

The most difficult part of this operation is finding the necessary screws that will have to be removed using a PH2 Phillips Head screw driver and spudger. In order to view the vacuum pump and/or inspect the inner workings of you appliance this bottom panel must be removed first.

  1. CqJnt5261ooeLOdH
    CqJnt5261ooeLOdH
    uwEUnX5wefj5IVVb

    • Use the PH2 screwdriver to remove the three 14mm Phillips Head screws.

    • Use a plastic opening tool to remove the rubber toppers, covering four more 14mm Phillips Head screws, and remove those screws with the same screwdriver.

  2. TkcRJQCq41vfwqhi

    • You may now carefully unhinge the bottom panel.

    • The bottom panel does not completely come off. There are many wires connecting the panel to the body of the machine, so be careful not to remove any of them on accident.

    My unit wasn't vacuuming the bags properly. I followed your instructions and found a vacuum line pinched closed. I repositioned it and the unit works great. Thanks for posting this. It saved me from having to buy a new unit.

    matt.doran228 -

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Mackenzie Grossgold

Mitglied seit: 14/04/16

922 Reputation

0 Kommentare