FujiFilm FinePix S5100 Back Cover Replacement

Geschrieben von: Kristen Gismondi
  • Kommentare: 0
FujiFilm FinePix S5100 Back Cover Replacement

Schwierigkeitsgrad

Moderate

Schritte

6

Zeitaufwand

10 Minuten

Einleitung

If you're looking to replace the back cover of a FujiFilm FinePix S5100 camera, use this guide. Before beginning, make sure to power off your camera completely and remove the batteries.

  1. wFucDfODqix3K2fT

    • Ensure your camera is in the off position.

    • Orient the camera upside down with the lens facing to the left and the battery compartment facing directly toward you.

  2. Open the battery door by pushing down and in the direction of the arrow on the door.

    • Open the battery door by pushing down and in the direction of the arrow on the door.

  3. ynkotnKLHRCXFtCf

    • Remove four AA batteries from the camera.

  4. pHiesXhyIqWQUKNb

    • Turn the camera so the screen is facing you and the camera lens is facing away from you.

  5. KCTG2mZBYj3QReW2
    KCTG2mZBYj3QReW2
    GJgdbSOG6Chq1jnF
    AFRevwkvsmfKopIn

    • Remove two 0.9mm Phillips #000 screws from the right side of the camera.

    • Remove one 0.6mm Phillips #000 screw from the left side of the camera.

    • Remove two 0.6mm Phillips #000 screws from the bottom side of the camera.

    • When replacing the back cover on the camera, there will be an audible click which ensures the cover has completely seated with the rest of the camera.

  6. hIPnyKdB4iNkRNaG
    hIPnyKdB4iNkRNaG
    rFPi6VQK4uLqUvXu
    ZYVGMsGHZVtxmuCg

    • Carefully pull the back cover and separate it from the rest of the camera body.

    • Carefully flip up the top of the tan colored tab to disconnect the ribbon cable and completely remove the back cover.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Kristen Gismondi

Mitglied seit: 12/11/14

71827 Reputation

0 Kommentare