Fujifilm Fine S1800 LCD Screen Replacement

Geschrieben von: Ryan Rockford
  • Kommentare: 0
Fujifilm Fine S1800 LCD Screen Replacement

Schwierigkeitsgrad

Moderate

Schritte

7

Zeitaufwand

20 - 25 Minuten

Einleitung

This guide explains how to replace the old broken LCD screen.

  1. V11CkWYR3HUROEhG

    • Use a J000 screwdriver to unscrew all the four 4mm screws on the left-hand side of the camera.

  2. TMsLQEvHtpTmFiYl

    • Use a J000 screwdriver to unscrew the four 4mm screws on the right-hand side of the camera.

  3. m2qRLxeKBsYSXVFe

    • Use a J000 screwdriver to unscrew three 4mm screws on the bottom of the camera.

  4. TjkM3xTrySaQxV1S
    TjkM3xTrySaQxV1S
    cBlZUjiRreZnHfGL

    • After all the 4 millimeter screws are taken out, take plastic opening tool and the cover will pop out.

    • You may have to work the back cover from different sides to get it to pop off.

  5. FvJFRBjZ26mRQg1O
    FvJFRBjZ26mRQg1O
    dhhO2lNcIpSrqa3T

    • Use a screwdriver to remove the three 2 mm screws from the back cover plate.

    • Gently lift the back cover away from the device, but do not pull or yank free.

    • The LCD screen is still connected to the motherboard via a small ribbon cable.

  6. NUDSiRJF6KX5dJuI

    • Move the lever to disconnect the ribbon cable from the circuit board.

    • Avoid ripping the fragile micro ribbon cable.

  7. 5QqNCCRsttHjsaKM

    • Gently remove the LCD screen. Avoid touching it directly.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Ryan Rockford

Mitglied seit: 15/02/17

597 Reputation

0 Kommentare