Einleitung
Use caution when carrying through with procedure, there are components involved than can pinch you when taking it apart.
-
-
Use the Tri-point Y0 screwdriver to remove the two 0.5mm screws on the horizontal axis.
-
Remove the other two 0.5mm screws on the bottom with the PH00 screwdriver.
-
-
-
Once you unscrew all of the screws, carefully remove the rear casing.
-
Detach the ribbon cable by lifting the tab on the connector.
-
-
-
Using the metal spudger, place it in between the leather grip and the black plastic compartment
-
Abschluss
To reassemble your device, follow these instructions in reverse order.
