Fujitsu Lifebook S6120 Motherboard Replacement

Geschrieben von: Jessi Gallant
  • Kommentare: 0
Fujitsu Lifebook S6120 Motherboard Replacement

Schwierigkeitsgrad

Moderate

Schritte

16

Zeitaufwand

25 - 30 Minuten

Einleitung

If your computer is completely unresponsive and the motherboard needs to be replaced or repaired, this guide will show you how to remove the motherboard from the Fujitsu Lifebook S6120.

  1. slTsnYQyCQJKH4IG
    slTsnYQyCQJKH4IG
    nawwlcQFCQmJUuxv
    SpWAPvgTJBF2jyPP

    • To prevent injury, make sure the laptop is unplugged and turned off before removing the battery.

    • Push the two tabs in towards the laptop.

    • Lift the battery up and out from the frame of the laptop.

  2. KPNW6T6phQiNrPSF
    KPNW6T6phQiNrPSF
    lMQodQPCPSR2BdMc

    • Use a plastic opening tool to lift the back of the hinge cover on the left and right sides of the computer.

  3. vivHNIGL1HEvqtpY

    • Lift the hinge cover.

    • The hinge cover is connected to the motherboard by a ribbon cable. To prevent damage, lift hinge cover slowly.

  4. WB3MeM5kKCtUtuel
    WB3MeM5kKCtUtuel
    OYDSyT5MDELvMnSq
    DsYVQDkI2SGWpQYf

    • Use the tweezers to disconnect the ribbon cable from the motherboard.

  5. 4vUNKHemsGEfY1F2
    4vUNKHemsGEfY1F2
    sM1FiSh3fa4EeOJn
    b2R5sxeONgdbWnwb

    • With the tweezers detach hinge cover cables from the motherboard.

    • Remove hinge cover.

  6. OThPgTbGRjfesQbo
    OThPgTbGRjfesQbo
    g4EpeF3HZ2yZPsjo
    B3T1NbR2U1qSKJNw

    • Lift keyboard enough to show the ribbon cable.

    • The keyboard has a ribbon cable attached to the motherboard. Lift keyboard carefully to prevent damage.

  7. tarSWQwTKGLp63Eq
    tarSWQwTKGLp63Eq
    1bMOTDL1klOnVhjF
    4S43PUASycMB2XTy

    • Use a plastic opening tool to release the ribbon cable from the motherboard.

  8. cPnZmJNgJ52jHZoG
    cPnZmJNgJ52jHZoG
    RVMQb23TWXkcdknK

    • Use a Philips head #0 to remove the 5mm screws.

    • Use a Philips head #00 to remove the 4mm screws.

  9. RnsVC6PbErECbvgB

    • Lift up the plastic frame from the base to expose the ribbon attached to the motherboard.

  10. TMQHUNip4yRHgENE
    TMQHUNip4yRHgENE
    rxCuyCjDtnOSlxvq

    • Remove the ribbon from the motherboard with a pair of tweezers.

  11. 1GmkqLlgQXOtURHs
    1GmkqLlgQXOtURHs
    dYXlErDFuaJqLIFK
    ZahHn5nQnDkxWG1V

    • Use a 5mm nut driver to unscrew the nuts.

  12. mFYpFFfsXtGY53Iy
    mFYpFFfsXtGY53Iy
    T2IlCjqcWXdNZCX3

    • Pull the ribbon tab up and off the motherboard.

  13. UHtaJO4mdVWryOoI

    • Remove the metal plate covering the motherboard.

  14. rfUD1KxNw5y5M3rb
    rfUD1KxNw5y5M3rb
    uSBT2YHIZALc6dvM

    • Remove the 3.5mm screws with a Philips head #0.

    • Remove the metal bracket and other pieces that rely on it for structure.

  15. HTL5C4Z1VdEm25Cj
    HTL5C4Z1VdEm25Cj
    IgMXFQQOlTeo4OWl

    • Pinch your fingers around the base of the connector and pull it out.

  16. De5sHcuo3xft6MOX
    De5sHcuo3xft6MOX
    k6I3W1JlALoEwKaV

    • Lift the motherboard off the plastic base.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Jessi Gallant

Mitglied seit: 20/03/18

899 Reputation

0 Kommentare