Fujitsu Lifebook Stylistic Q584 Inner Back Shield Replacement

Geschrieben von: Spencer Bacon
  • Kommentare: 0
Fujitsu Lifebook Stylistic Q584 Inner Back Shield Replacement

Schwierigkeitsgrad

Moderate

Schritte

7

Zeitaufwand

4 Minuten

Einleitung

This is another protective layer you will need to remove prior to accessing the internal parts of the device.

  1. 2gN3ZT1LcTcDtYKb

    • Remove the white sticker covering the screws (if applicable).

    • Use the PH1 screwdriver to remove the four 2 mm screws from the the backside of the device.

  2. XqGwyZCPSvPIuTdS

    • Insert the plastic opening tool along the seam of the back case.

    • Gently slide the plastic opening tool along the entire seam popping the clips free.

  3. qfg4IOgJlri6pRnq

    • Carefully lift the back case and remove the smartcard ribbon from the motherboard.

  4. YbmKFvFqTfCMniNw

    • Remove the ten 3mm screws with a PH00 screwdriver from the shield.

  5. 1qTxHcIZc5FZ5gRh

    • Remove the grey docking station port cover.

  6. FsCMAvueYsT1yIPB

    • Gently slide the plastic opening tool along the entire seam popping the clips free.

  7. VakGTMiHnkGUFgXF

    • Lift the shield away from the device and remove the fingerprint scanner's ribbon from the motherboard.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Spencer Bacon

Mitglied seit: 21/09/17

410 Reputation

0 Kommentare