Einleitung
This guide allows the user to access and replace the MicroSD card of a Fujitsu Lifebook Stylistic Q584.
Werkzeuge
-
-
Remove the white sticker covering the screws (if applicable).
-
Use the PH1 screwdriver to remove the four 2 mm screws from the the backside of the device.
-
-
-
Insert the plastic opening tool along the seam of the back case.
-
Gently slide the plastic opening tool along the entire seam popping the clips free.
-
-
-
Lift the shield away from the device and remove the fingerprint scanner's ribbon from the motherboard.
-
-
-
Disconnect upper peripheral ribbons from motherboard.
-
Disconnect left peripheral ribbon from motherboard.
-
-
-
Remove all of the ribbon connector cables from the motherboard using an ESD-safe spudger.
-
-
-
After removing the motherboard, use an ESD-safe spudger to pry up the MicroSD card from the slot.
-
Gently separate the MicroSD card from the device.
-
To reassemble your device, follow these instructions in reverse order.
Ein Kommentar
I have some OS problem can the SSD be replaced..?