Einleitung
This guide doesn't require you to remove the back panel. The parts in the base are relatively small so we suggest having a way to keep track of them. Cleaning is at your discretion although we recommend a mild detergent/dish soap.
Werkzeuge
-
-
Flip Furby upside down so his feet are pointed towards you.
-
Unscrew the right and left screws on the base.
-
-
-
Remove the base from your Furby.
-
Flip over the base so the screws are on the right and left.
-
Unscrew the 2 right and 2 left inside screws.
-
-
-
Lift the housing for the foot components.
-
Rotate the base 90 degrees.
-
Locate all four of the foot activation levers. Remove them one by one from the base.
-
-
-
Locate and gently lift out the four small springs using tweezers.
-
Now that you have all parts are removed, they can be cleaned and reassembled into Furby's "feet".
-
To reassemble your device, follow these instructions in reverse order.
Ein Kommentar
I greet my furby boom 2012 he falls asleep and when I wake him up he starts to cry and then he falls asleep. This started after a week without using.What I can do,Thanks for your help.Juan