Garmin Approach S2 Water Proof Gasket Replacement

Geschrieben von: dengweiyuan931226
  • Kommentare: 1
Garmin Approach S2 Water Proof Gasket Replacement

Schwierigkeitsgrad

Moderate

Schritte

3

Zeitaufwand

7 Minuten

Einleitung

This is a short guide, but take note that the gasket will want to sit a certain way upon the groove.

  1. x1CuXMZxxL6rvLpN
    x1CuXMZxxL6rvLpN
    ryIVNjkO52ndt1lW

    • Remove the six T5 Torx 6.32mm screws securing the back cover to the watch.

    The bracelet on the same side as the S2 logo must be removed as well. 2 very small allen wrenches must be used to removed the bracelet screw.

    Thomas Glasgow -

  2. BjJCUABca2WclENk

    • Remove the back cover carefully.

    • Even after the screws have been removed, the back cover can still be quite difficult to take off. Moderate to extensive prying may be required. Be gentle, but firm.

  3. XSffhNlePf4SMQQQ

    • Remove the orange gasket.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

dengweiyuan931226

Mitglied seit: 16/02/16

301 Reputation

0 Kommentare