Garmin Dash Cam 20 Internal Assembly

Geschrieben von: Jesse Hillman
  • Kommentare: 0
Garmin Dash Cam 20 Internal Assembly

Schwierigkeitsgrad

Moderate

Schritte

6

Zeitaufwand

20 Minuten

Einleitung

This guide will walk users through removing the top cover of the Garmin Dash Cam as well as the metal battery frame. Due to the compact nature of this device, this guide is a prerequisite to other guides that require access to the internal components of the device.

  1. aAUZZHquFKtTeUqW
    aAUZZHquFKtTeUqW
    3CAOaGXV3YTXiala

    • Be sure to turn off the Dash Cam by pressing the power button.

  2. XhoDtg1fAOVNKaYY
    XhoDtg1fAOVNKaYY
    GDrJ233xnlsvjRk6

    • Rotate the Dash Cam to where the socket faces you.

    • Remove the 9 mm screw using the Torx T6 screwdriver.

  3. TVWp2O5QcQkMNyD3
    TVWp2O5QcQkMNyD3
    1EFIMOaFGxGMRNBv

    • Remove the Dash Cam socket piece.

  4. jRvlnbBoWNutfIQf
    jRvlnbBoWNutfIQf
    fCRpdudxDksQTFsw

    • Rotate the Dash Cam to where the product information faces you.

    • Remove the two 5 mm screws using the Torx T5 screwdriver.

  5. cSAIJknpDoOLh5or
    cSAIJknpDoOLh5or
    xPb5qWucM4HhcOCg
    EVvZqJiBWLYvqyKf

    • Remove top case from the bottom case.

    • The compact nature of the casing requires use of the metal spudger for needed leverage.

  6. J1oZQEoYQbhFOhLN
    J1oZQEoYQbhFOhLN
    KqAR2sNKlJHFkTrC
    HSMUZdIskTAKP3JJ

    • Remove the two 5mm screws using the Torx T5 screwdriver

    • By removing the screws, the metal battery frame will now become free from the rest of the device.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Jesse Hillman

Mitglied seit: 04/10/16

757 Reputation

0 Kommentare