Garmin Dezl 760LMT Speaker Replacement

Geschrieben von: Ryan Williams
  • Kommentare: 0
Garmin Dezl 760LMT Speaker Replacement

Schwierigkeitsgrad

Moderate

Schritte

5

Zeitaufwand

10 Minuten

Einleitung

This guide will show you how to properly remove the speaker from your Garmin without damaging the other components.

  1. GhElHAIExlyB1wvE
    GhElHAIExlyB1wvE
    UQhMt3VXsYuB2VGC

    • Using a Torx T6 Screwdriver, remove the ten 7mm screws from the back panel.

  2. hfoSQwaKyKwUwQuO
    hfoSQwaKyKwUwQuO
    egwKBpGKadySIGOG
    q1URsYLumjL52fEe

    • Using a metal spudger, pry the device apart.

    • To recombine them, line up the two halves of the device and press them together.

  3. xApZnQYHULdYFKxc

    • Turn the device over, laying it on its back with the screen facing upwards.

    • Lift the front panel away from the silver part of the back panel.

    • Make sure not to rip the ribbon cable that is connected to the screen and the motherboard.

  4. 3pGNsDBykpDsoU3y
    3pGNsDBykpDsoU3y
    jXeD66oTFMfLQEGq

    • Using the sharp end of the metal probe, scrape away the wax around the base of the speaker.

    • Slide the metal probe underneath the speaker and pry upwards.

    • During reassembly, use electrical tape to hold the speaker into place.

  5. JEpWNq6gsXvjfUtO
    JEpWNq6gsXvjfUtO
    3yoQFXJYxQUKbdTr

    • Grasp the speaker wire near the motherboard and lift upward to detach the connector.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Ryan Williams

Mitglied seit: 28/09/16

751 Reputation

0 Kommentare