Garmin Edge 830 Battery Replacement

Geschrieben von: Alden Gibbs
  • Kommentare: 0
Garmin Edge 830 Battery Replacement

Schwierigkeitsgrad

Moderate

Schritte

8

Zeitaufwand

1 Stunde

Einleitung

If you find yourself on this guide, it means your battery is draining too quickly. In that case, it might be time to replace your battery. It is important to note that for this step you must remove the touch display and motherboard in order to access the battery. Therefore, the steps for this guide begin with taking off the touch screen followed by the motherboard.

  1. CXOFEKNEmENaAPIf

    • Microwave the iOpener for about 30 seconds. Then place it on top of the screen, and let it sit for about 2 minutes.

    • Repeat this process a second to ensure that the glue is becoming loose.

  2. lmcgVSCTMVOVOyPk

    • Use the Jimmy tool carve around the edges of the screen to break the glue seal.

  3. WqXONU5VpX1YiLWZ

    • Use the iFixit plastic opening tool to pry open the screen.

  4. 1p2rRc3VqhLsH6hS

    • Remove brown and green tape with angled tweezers

  5. JQWjXVCJp1AeHULZ

    • Unscrew the three 1 mm screws around the perimeter of the motherboard

  6. aNTUtEPIAEf5K23N

    • Use the reverse tweezers to gently pull on the silver box on top of the motherboard to remove it from the back cover.

  7. ReWMPmWOBxewmBLR
    ReWMPmWOBxewmBLR
    QgVNBrdJGbdFI21d

    • Locate the wire connector on the motherboard. Slowly release the wires by gently pulling with the blunt tweezers.

  8. sakXrwGA5pXvnaek

    • Use the halberd spudger to lift and remove the battery from the back cover.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Alden Gibbs

Mitglied seit: 21/03/22

265 Reputation

0 Kommentare