Garmin Fenix 3 Display Assembly Replacement

Geschrieben von: Adam Estabrook
  • Kommentare: 3
Garmin Fenix 3 Display Assembly Replacement

Schwierigkeitsgrad

Easy

Schritte

4

Zeitaufwand

5 Minuten

Einleitung

If your watch face is damaged, cracked, or chipped, you can learn how to replace it using this guide. This guide involves simply unscrewing screws from the watch face and carefully disconnecting the screen’s ribbon cable from the motherboard. You will need a T6 Torx screwdriver and a spudger.

  1. gFNKTS25ByksjIbN
    gFNKTS25ByksjIbN
    ieYarQMW54mYIDHk

    • Use a T6 screwdriver to remove the five 1.7 mm screws from the watch face.

  2. hGP4TKAUKaHPxtVZ

    • Carefully lift the face off the watch base.

    • Do not yank the face. A ribbon connector connects the face and the motherboard, and yanking could result in damage to the motherboard or ribbon.

  3. YcTiahGxtqjcqb16

    • Use a spudger to lift up and free the screen ribbon cable's press-fit connector from the motherboard.

  4. JaOWBZPorPLZUMdt

    • Set the watch face aside.

    Hi can i replace only lcd because my sapphire glass is ok

    Drazen Popadic -

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Adam Estabrook

Mitglied seit: 07/09/18

1009 Reputation

2 Kommentare

Thanks Adam. How do you chgange the glass in a Fenix 3? I can strip the watch down as you have described but not sure how to replace the screen.

Richard Davies-Cooke -

I have the same question.

Nicolas Chartier -