Garmin Fenix 3 GPS Antenna Replacement

Geschrieben von: Adam Estabrook
  • Kommentare: 5
Garmin Fenix 3 GPS Antenna Replacement

Schwierigkeitsgrad

Easy

Schritte

6

Zeitaufwand

5 Minuten

Einleitung

If your GPS is failing to find your location, lags, or performs oddly, you can use this guide to locate and replace the antenna, which is located inside the watch. To do this, you will need a T6 Torx screwdriver and a spudger. Tweezers are best used for extracting the GPS antenna.

  1. gFNKTS25ByksjIbN
    gFNKTS25ByksjIbN
    ieYarQMW54mYIDHk

    • Use a T6 screwdriver to remove the five 1.7 mm screws from the watch face.

  2. hGP4TKAUKaHPxtVZ

    • Carefully lift the face off the watch base.

    • Do not yank the face. A ribbon connector connects the face and the motherboard, and yanking could result in damage to the motherboard or ribbon.

  3. YcTiahGxtqjcqb16

    • Use a spudger to lift up and free the screen ribbon cable's press-fit connector from the motherboard.

  4. JaOWBZPorPLZUMdt

    • Set the watch face aside.

    Hi can i replace only lcd because my sapphire glass is ok

    Drazen Popadic -

  5. PW4eDJu2SFb2WBPX

    • Locate the antenna, which is located on the motherboard.

  6. yvSJPkI5DKMbH1Yf

    • Carefully remove the antenna, and set it aside.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Adam Estabrook

Mitglied seit: 07/09/18

1009 Reputation

4 Kommentare

Hi, where did you get a replacement Antenna?`I have a Fenix 3 with no GPS reception at all..

Regards, Nico

Nico Baumgartner -

Same as you…

X PuyA -

Hi, where did you get a replacement Antenna? I have a Fenix 3 with no GPS reception at all..

Regards, Dusan

dusan.kosobud -

Hi did you find gps antenna

Abdessamad Faroque -