Garmin Rino 700 Motherboard Replacement

Geschrieben von: Abigail Dugan
  • Kommentare: 0
Garmin Rino 700 Motherboard Replacement

Schwierigkeitsgrad

Moderate

Schritte

5

Zeitaufwand

20 - 35 Minuten

Einleitung

If you’re having trouble hearing audio or using the volume buttons on your Garmin Rino 700, there might be a problem with your motherboard either through a connection error or possibly damage. This guide will teach you how to replace the motherboard to get these features working again. For this replacement all you need is a TR6 Torx Security screwdriver and a spudger. There are no hazards to this guide. Going forward, you can see how to prevent these issues on our troubleshooting page: Garmin Rino 700 Troubleshooting

  1. QYurGHs1G2ojfoOQ

    • Flip the Garmin Rino 700 over so that the underside is facing up.

    • Using the TR6 Torx Security screwdriver, remove the six 9.5 mm screws on the backside of the device.

  2. F26F6LT13GtqZiUW
    F26F6LT13GtqZiUW
    suvuHpAyAMYGWaQD

    • Remove the battery cover and set it to the side.

  3. oQUJ4T1jr1QX24gM
    oQUJ4T1jr1QX24gM
    3vNJe4KiJpKAnW1j

    • Use the spudger to disconnect the battery wire port from the motherboard.

  4. P2hTNbWxonjxLLJf
    P2hTNbWxonjxLLJf
    sTsNhfKGXZEYAbae

    • Using the T5 Torx screwdriver, remove the two 6.4 mm screws on the motherboard.

  5. OptRVPrEViyifigZ
    OptRVPrEViyifigZ
    G6cPd1rMUWImPcOw
    P4MVweuQnSPfxMsv

    • Using the nylon spudger, lift the motherboard out of its position.

    • Slide the motherboard out of the front panel of the device.

    • Carefully disconnect the motherboard from the panel and remove it out of the device.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Abigail Dugan

Mitglied seit: 28/09/21

512 Reputation

0 Kommentare