Garmin StreetPilot C330 Outer Casing Replacement

Geschrieben von: Adrian Leon
  • Kommentare: 0
Garmin StreetPilot C330 Outer Casing Replacement

Schwierigkeitsgrad

Moderate

Schritte

5

Zeitaufwand

15 - 30 Minuten

Einleitung

This guide will help you replace the outer casing of your Garmin StreetPilot C330.

  1. f1mDTqvNKaKmPG5F
    f1mDTqvNKaKmPG5F
    WufBcIBPMmo1YfpV
    cCyNVHnIyZKQ42Xc

    • At the top of the outer frame, insert the plastic spudger into the groove in the center.

    • Lever the frame gently until it pops out of the case.

  2. MjFTNlZvVNNcpcaf
    MjFTNlZvVNNcpcaf
    eKFESYOX1GOTf65U
    6ZVBhfcG3EdOHHjR

    • Use a Phillips #00 screwdriver to remove the four screws around the screen.

  3. WxMImTL1XEyboNoi
    WxMImTL1XEyboNoi
    1bUxESy2SAMgQVXC

    • Gently pull from both ends of the casing to separate the front and back panels.

    • Do not force the pieces apart wider than the length of the connecting wires, or you will damage the wiring.

  4. unMPuZrswsFlqTNh
    unMPuZrswsFlqTNh
    tDGKj4LIH52pYLkB
    RuAHbLPNVBoJaBR5

    • Gently unplug the white cable connector using either your fingers or tweezers.

  5. BeNJjmsH6PVIFEUr

    • Carefully expose both halves of the device.

    • Be sure not to pull the two halves apart further than the black wire can reach.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Adrian Leon

Mitglied seit: 07/10/10

173 Reputation

0 Kommentare