Einleitung
Before you begin disassembling the device, be sure the power is off.
Werkzeuge
-
-
Wedge a plastic opening tool in between the outer frame and the rear panel assembly.
-
Pry the outer frame off the perimeter of the rear panel assembly.
-
-
-
Remove the four #00 Phillips screws securing the front case assembly to the rear case assembly.
-
Carefully lift, but do not completely separate, the front case assembly from the rear case assembly.
-
-
-
Gently pull the battery cable connector from its socket on the motherboard.
-
The second connector can remain attached to the motherboard, but be careful not to break the connector while handling both halves of the device.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.
