Gateway LT41P10u Monitor Replacement

Geschrieben von: Michael Smith
  • Kommentare: 0
Gateway LT41P10u Monitor Replacement

Schwierigkeitsgrad

Moderate

Schritte

5

Zeitaufwand

10 Minuten

Einleitung

This is the guide for complete removal of the Gateway LT41P10u monitor. When removing monitor handle with care to avoid possibly cracking the screen.

Werkzeuge

  1. 5Oh34KxXAIIcOXKD

    • Place the laptop upside down on a flat surface so you can see the battery.

  2. NIsGr5eebIUVADtH

    • Pull the two marked tabs towards the outside of the computer to unlock them.

  3. BICf56XycCEmkCcv

    • While keeping both of the tabs in the unlocked position, grab the battery and pull outwards, until the battery slides out from the rest of the computer.

  4. MnN6tENWdyatI1P3
    MnN6tENWdyatI1P3
    puUocCEiyNDGRBs3

    • Carefully use a spudger to separate the monitor from top panel.

    • Gently remove lower hooks from the hinges. (see second image)

  5. K1I54SGAHLCVmoSE
    K1I54SGAHLCVmoSE
    sUFZjkbOerPq5E5J

    • Once you completed separating the monitor from the top panel disconnect the cable shown here in red by raising the cable lock and pulling the wires away.

    • The second image is how it should look once completely disconnected.

Abschluss

To reinstall your device, follow these instructions in reverse order.

Tinte & Feder

Michael Smith

Mitglied seit: 19/10/17

401 Reputation

0 Kommentare