Einleitung
This is a prerequisite guide to instruct you on how to open up your laptop in order to access the motherboard.
-
-
Remove 18 6.0 mm Phillips #00 screws from the bottom of the laptop.
-
Remove 5 6.0 mm Phillip #00 screws from under cover.
-
-
-
Separate the bottom panel from the touchpad assembly by inserting a plastic opening tool between them on all four sides.
-
-
-
Pull black ribbon wire from port using tweezers in order to completely separate touchpad assembly from bottom assembly.
-
-
-
Disconnect the two ZIF ports that attach the touchpad assembly to the motherboard.
-
First flip open the flap covering the ribbon using a spudger or fingernail.
-
Second gently pull the ribbon away from the port.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.
