GoPro Karma Landing Gear Replacement

Geschrieben von: Jay Ingram
  • Kommentare: 0
GoPro Karma Landing Gear Replacement

Schwierigkeitsgrad

Easy

Schritte

6

Zeitaufwand

10 - 15 Minuten

Einleitung

Use this guide to remove and replace your broken landing gear. It will show you how to remove the entire assembly safely for replacement. This may be needed if broken on a rough landing.

  1. qsYGEQmFSs6VDc3D

    • Hook your fingers on the tab and pull out the battery.

  2. emI1ly3hOkgfcWIY
    emI1ly3hOkgfcWIY
    5HvFcQheiGuromKT
    kcnRyTY6EnwHJYQl

    • Locate stabilizer collar’s unlock and lock symbols. Twist the collar counterclockwise to unlock the stabilizer from GoPro Karma body.

    • Place the GoPro Karma on a stable surface with the legs folded in and the stabilizer facing towards yourself.

  3. 5DyMMXFZaWuZeiPl

    • Remove the stabilizer by pulling the entire stabilizer out of the drone body.

  4. vgupBwSaPV1V6UmF

    • Flip the drone upside down with the landing gear out.

    • Remove the four 1.2 cm long hex screws with a Hex 2.0 screwdriver in the four corners of the landing gear

  5. cNIDDQVYj2nCSDvV

    • Push with your thumb and pull up with your fingers to remove the landing gear.

    • Caution: The landing gear is connected by a thin cable so do not pull too far away.

  6. 4dAenYsZdCfIQPqY
    4dAenYsZdCfIQPqY
    up2L2IvQWMKpN2Jt

    • Flip over the landing gear and locate the cable connector.

    • Use your thumbnail to disconnect the cable and free the landing gear.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Jay Ingram

Mitglied seit: 19/04/18

334 Reputation

0 Kommentare