Einleitung

This is a prerequisite guide! This guide is part of an another procedure and is not meant to be used alone.

This guide shows how to remove and replace either or both front-facing selfie cameras for your Pixel 3 XL. Compared to the published front-facing camera guide, this prereq does not have the determination step.

  1. uIblmnHfCqI1UmDi
    • Remove the five T3 screws securing the motherboard shield:

    • Three 4 mm long screws

    • Two 3 mm long screws

  2. kQfHWlxePxZKqPtS
    • Remove the motherboard shield.

  3. VanRBMIYMGegICCg
    • Remove the three 3 mm long T3 screws securing the front camera bracket.

  4. FDRZvPAYWq13yvoH
    • Remove the front camera bracket.

  5. qbmtvJ4FPpSFc5uf
    qbmtvJ4FPpSFc5uf
    XxkYLLCRNLd14a3H
    fo4Jie1XoDDdKs3r
    • Use the point of a spudger to carefully pry up and disconnect the cameras from their motherboard sockets.

    • Be very careful not to dislodge the small surface-mounted components surrounding the sockets.

  6. EtCHJifOSAXKfV3F
    EtCHJifOSAXKfV3F
    Don4WbX4rQn4RkVQ
    OWHlF55KH5pbLhPM
    • The cameras are lightly adhered in place.

    • Use the flat end of a spudger to pry up and loosen the camera modules from their recess.

  7. UA6WnowKKMvlET3S
    • Remove the front-facing cameras.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Repair didn't go as planned? Try some basic troubleshooting, or ask our Answers community for help.


Arthur Shi

Mitglied seit: 03/01/18

218620 Reputation

0 Kommentare