Einleitung

Is your device not loading content on websites you’ve previously visited? Are you experiencing any problems with your device freezing or the Blue Screen of Death (BSoD)? If so, the RAM in your device may be faulty and needs to be replaced. Follow the instructions in this guide to remove and replace the RAM in the HP 14-am052nr laptop.

  1. 3b1OwNMpsABL2bca
    3b1OwNMpsABL2bca
    UxmjHqMLZDyRTjwu
    QSEVuILKn4LQEl4O
    • Turn the laptop over to its bottom so that the backside is facing you.

    • Using your fingers, push the two locking tabs inwards to release the battery.

    • Remove the battery from the device.

  2. SynfRaNViQV2fc2I
    SynfRaNViQV2fc2I
    1odfAZTd5Z5AlcLm
    • After removing the battery with the laptop on its back, expose screws that are hidden under the rubber feet and the center label.

    • Using the Phillips #0 screwdriver, remove fourteen (14) 6 mm screws from the back panel.

  3. sJCnZsmMUtEgJfT4
    sJCnZsmMUtEgJfT4
    vBsBJfmMAShAax4P
    • Use a prying tool to remove the back panel from the base of the computer.

  4. ZwUOpPaqkbGS6Yug
    • Push the two silver tabs on the sides of the RAM away from each other.

    • The RAM should now be loose and pointed upwards.

  5. uSJOItZBX3r5DL4B
    • Gently lift and remove the RAM stick at a 45 degree angle from the laptop.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Matthew Heather

Mitglied seit: 03/11/21

379 Reputation

0 Kommentare