HP 14-fq1025nr Heat Sink Replacement

Geschrieben von: Kristen Gismondi
  • Kommentare: 0
HP 14-fq1025nr Heat Sink Replacement

Schwierigkeitsgrad

Moderate

Schritte

9

Zeitaufwand

Keine Schätzung

Einleitung

  1. 4TcU6ZpJRPyRoMNd

    • Flip the laptop upside down so the bottom cover is facing up.

  2. gJbIgHIfIEXqDG35

    • Use a pair of tweezers to grab and pull the feet off of the cover.

  3. m4k4NTIdJiFLGTTt

    • Remove the two 4 mm screws using a Phillips #0 screwdriver.

    • Remove the six remaining 6 mm screws located around the edges and underneath the feet using a Phillips #0 screwdriver.

  4. KYtuqoAAJDgTZHZd

    • Flip the laptop right-side up and slide an iFixit opening tool and/or Jimmy inside of the bottom cover seam to pry it open.

  5. vWDLNbYKNYH5kRY2

    • Remove the bottom cover.

  6. 5a4UjEAPjLrybm6b

    • Remove the three silver screws (one 2 mm screw and two 4 mm screws) holding down the fan using a Phillips #0 screwdriver.

  7. ktRfLwlAjKDUYCTT

    • Unplug the fan’s power cord from the motherboard.

    • Use tweezers to pull the plug out, if needed.

  8. Ypv23sQVG2pXawQl

    • Remove the fan.

  9. lhBPvMFLmfZlVYJj

    • Remove the four gray 3 mm screws around the heat sink using a Phillips #0 screwdriver.

    • Remove the heat sink.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Kristen Gismondi

Mitglied seit: 12/11/14

71827 Reputation

0 Kommentare