HP 14-fq1025nr Motherboard Replacement

Geschrieben von: Alex Cutler
  • Kommentare: 0
HP 14-fq1025nr Motherboard Replacement

Schwierigkeitsgrad

Moderate

Schritte

16

Zeitaufwand

15 - 20 Minuten

Einleitung

In this guide, you will learn how to remove a HP 14-fq1025nr motherboard and replace it with a new one. The motherboard houses all of the computer's main components such as the CPU, RAM, and storage. A faulty motherboard may result in a completely dead system due to the components not being able to communicate properly with each other.

WARNING: The computer uses a lithium-ion battery which contains toxic substances/flammable substances. Handle with caution.

  1. 4TcU6ZpJRPyRoMNd

    • Flip the laptop upside down so the bottom cover is facing up.

  2. gJbIgHIfIEXqDG35

    • Use a pair of tweezers to grab and pull the feet off of the cover.

  3. m4k4NTIdJiFLGTTt

    • Remove the two 4 mm screws using a Phillips #0 screwdriver.

    • Remove the six remaining 6 mm screws located around the edges and underneath the feet using a Phillips #0 screwdriver.

  4. KYtuqoAAJDgTZHZd

    • Flip the laptop right-side up and slide an iFixit opening tool and/or Jimmy inside of the bottom cover seam to pry it open.

  5. vWDLNbYKNYH5kRY2

    • Remove the bottom cover.

  6. H3bDQVYQLUHFH1T5
    H3bDQVYQLUHFH1T5
    D11VJOY4OgYIICeD

    • Remove the four gray 3 mm screws holding down the battery using a Phillips #0 screwdriver.

  7. iRvwxe1CRMDxVOZP

    • Remove the battery.

  8. 5a4UjEAPjLrybm6b

    • Remove the three silver screws (one 2 mm screw and two 4 mm screws) holding down the fan using a Phillips #0 screwdriver.

  9. ktRfLwlAjKDUYCTT

    • Unplug the fan’s power cord from the motherboard.

    • Use tweezers to pull the plug out, if needed.

  10. Ypv23sQVG2pXawQl

    • Remove the fan.

  11. lhBPvMFLmfZlVYJj

    • Remove the four gray 3 mm screws around the heat sink using a Phillips #0 screwdriver.

    • Remove the heat sink.

  12. ov6rrO1TakuOTiXa

    • Remove the single 6 mm screw holding down the SSD using a Phillips #0 screwdriver.

  13. 4JOnOdVkFToWpfNf

    • Slide the SSD out of the slot.

  14. O5vHbsiqQqxeUyuC
    O5vHbsiqQqxeUyuC
    XGOUT4haRWOC2cF1
    ZPxXUrAcVfTIKORL

    • Remove the five 3 mm gray screws from around the motherboard using a Phillips #00 screwdriver.

  15. Y4utGjZJmBgGWJXM
    Y4utGjZJmBgGWJXM
    FudFoX1is2o2uyjd

    • Unplug the wire connections.

    • Use tweezers if needed.

  16. 5cpAEAUkG2VtLIqA

    • Remove the motherboard.

    • Use the iFixit opening tool to pry it out if needed.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Alex Cutler

Mitglied seit: 27/09/22

301 Reputation

0 Kommentare