HP 14-fq1025nr SSD Replacement

Flip the laptop upside down so the bottom cover is facing up.

Use a pair of tweezers to grab and pull the feet off of the cover.

Remove the two 4 mm screws using a Phillips #0 screwdriver.

Remove the six remaining 6 mm screws located around the edges and underneath the feet using a Phillips #0 screwdriver.

Flip the laptop right-side up and slide an iFixit opening tool and/or Jimmy inside of the bottom cover seam to pry it open.

Remove the bottom cover.

Remove the four gray 3 mm screws holding down the battery using a Phillips #0 screwdriver.

Remove the battery.

Remove the single 6 mm screw holding down the SSD using a Phillips #0 screwdriver.

Slide the SSD out of the slot.