Einleitung
Werkzeuge
-
-
Shutdown the computer and remove the battery
-
Turn it right-side down, print a picture of its back cover
-
-
-
Use double-sided tape to stick all the screws in its right place on the printed picture
-
Under the ram cover there is a screw, remove it
-
Remove the two screws under the DVD reader
-
-
-
Remove the two rubber feet beside battery place
-
Turn the laptop right-side up and open and insert a pry tool along the top-side keyboard until release it
-
Release the connector to which the keyboard cable is attached, and then disconnect the keyboard cable.
-
-
-
Remove three screws under keyboard
-
Insert pry tool around the cover in which touchpad used to be until release
-
-
-
Release the connector to which the cable of two usb ports has been attaching
-
Remove the two usb ports and the speaker, and the two HDD screws then pull the HDD off
-
Remove metal frame in the first HDD and put it in the second
-
To reassemble your device, follow these instructions in reverse order.
Ein Kommentar
Good job it did not work