HP 15-dy2024nr Back Cover Replacement

Geschrieben von: Konnor Young
  • Kommentare: 0
HP 15-dy2024nr Back Cover Replacement

Schwierigkeitsgrad

Easy

Schritte

3

Zeitaufwand

3 - 9 Minuten

Einleitung

When replacing any part of the HP 15-dy2024nr, the first step is to remove the back cover. Make sure you have the correct tools before continuing to this guide.

Before removing or replacing any part, be sure the laptop is powered off. If you are unsure, turn the laptop on, then shut it off from the start menu.

  1. ANQ2tBtq5L16noAt
    ANQ2tBtq5L16noAt
    ot4D5TnWuYZfjf2E

    • Use the Halberd spudger to peel one corner of each of the rubber feet from the bottom of the laptop.

    • Gently peel the feet from the laptop revealing the screws underneath.

    • If the rubber foot peels away but leaves adhesive behind you must peel the adhesive away before removing the screws.

  2. evJvbP1NdEXQ22TY
    evJvbP1NdEXQ22TY
    hF6q4CihNgZPJM1H
    fPNlY1HQsUrnDfZX

    • Use a Phillips #1 screwdriver to remove:

    • Two 2.5mm x 6mm screws

    • Six 2mm x 6mm screws

    • Be sure to keep different screw sizes separated.

  3. Zph4BmunnKNFEjgQ
    Zph4BmunnKNFEjgQ
    UOADtpNLfnrBOW3W
    mIkiPnRovqSLe4oQ

    • Insert an iFixit opening tool into the seam between the keyboard area and bottom cover.

    • Using another iFixit opening tool, slide along the seam to unhook the clips.

    • There are clips all the way around the seam. You may hear a popping sound as the clips come loose. This step may require some force to separate the back cover from the laptop.

    • When the front of the laptop is open, you can use your finger to hold a corner open then slide an iFixit opening tool along the seam toward the back corner.

    • After the clips have been released, flip the laptop over and lift the cover.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Konnor Young

Mitglied seit: 27/09/22

446 Reputation

0 Kommentare