HP 310-1037 Hard Drive Replacement

Geschrieben von: oldturkey03
  • Kommentare: 2
HP 310-1037 Hard Drive Replacement

Schwierigkeitsgrad

Moderate

Schritte

4

Zeitaufwand

10 - 15 Minuten

Einleitung

Here is a HP 310-1037 with a failed hard drive. The Hitachit 1TB hard drive is a common item to fail. The repalcement is very easy and not hidden screws or adhesive. All that is needed is a flathead screwdriver and a Phillips screwdriver.

  1. tNWHUMkr6wjmoLZc
    tNWHUMkr6wjmoLZc
    vmaxWwoO1Y2Kb4Um
    PILp5LBhmi1HYYkE

    • HP310-1037 Touchsmart PC with a dead hard drive. The hard drive is located behind the stand cover.

    • Lay the PC flat on the front to gain access to the stand cover

    • Remove the single screw that holds the stand cover to the chassis with a flat tip screwdriver

  2. XjhiAwvjAfoHNsXN
    XjhiAwvjAfoHNsXN
    mFDHBNHWYxuHe4O1
    SbQshCxuqGlwM1EO

    • Remove the stand cover

    • The hard drive caddy is held in place with 1 Phillips screw

    • Use a #0 Phillips screwdriver to remove that screw

  3. SQFSVt4LIejsbHFU
    SQFSVt4LIejsbHFU
    QsnJAGxDukl52ovd
    TPqscIkN32RPI1tH

    • Lift the handle on the hard drive caddy

    • and pull it to the backside. This will remove the hard drive caddy from the computer.

    • To remove the hard drive from the caddy, turn it over. There are four Phillips scres that hold the hard drive in place.

  4. iAvjLTWLdjhSlydD
    iAvjLTWLdjhSlydD
    OUpVMA2VtqEc1VWo

    • Once the four screws are removed, slide the hard drive out of the caddy.

    • Here is the failed drive. It is a Hitachi HDS721010CLA332. Failure with this drive is all to common.

    Where can I Get This Hard Drive? If you can e-mail me alan.becerril14@gmail.com

    Alan Becerril -

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

oldturkey03

Mitglied seit: 29/09/10

734572 Reputation

Ein Kommentar

This one made me laugh - Remove two screws. Pull the drive out. Difficulty: Moderate.

LOL

Justin Coope -