HP 7 Plus 1302 Battery Replacement

Geschrieben von: Jason
  • Kommentare: 0
HP 7 Plus 1302 Battery Replacement

Schwierigkeitsgrad

Moderate

Schritte

5

Zeitaufwand

15 Minuten

Einleitung

Changing the battery may be necessary if the device wont power up, or doesn't seem to hold a charge anymore. The most challenging step to changing the battery is removing the back cover. Acquiring the tools listed (or similar) are absolutely necessary for a complication free battery replacement.

  1. Q6CDDLZnSAxXt1cF

    • Using the T5 Torx Screwdriver, remove the T5x3mm screws located in all 4 corners.

    • Device should be turned off and unplugged before starting the replacements.

  2. cokiSUJED6ZbeTDC
    cokiSUJED6ZbeTDC
    nPXqXcfh2MooPJh3

    • Use the plastic opening tool to push in between the front and the back of the tablet.

    • Slide the plastic opening tool around all 4 sides of the tablet to separate the back cover.

    • Be careful when you are trying to remove the back as it can damage the screen if you force it too much.

  3. thSIKNdJcLoCGLfN
    thSIKNdJcLoCGLfN
    AUA2DKYwe1mxTJrU

    • Continue sliding the plastic opening tool around the tablet until all 4 sides are separated from each other.

    • Remove the back cover.

  4. LiWAlXqGSG3kZEmP
    LiWAlXqGSG3kZEmP
    4nDdY1OnKNH63Q4y

    • Push out the battery connector using the spudger.

    • Swing the battery connector clear of the connector socket.

  5. DWY611jEYSi6kNTU

    • Lift the battery from the device.

Abschluss

To reassemble your device, follow these instructions in reverse order. Use new double sided tape to secure the new battery.

Tinte & Feder

Jason

Mitglied seit: 07/07/15

101 Reputation

0 Kommentare