HP Compaq 6710b Power Button Panel Replacement

Geschrieben von: Khulan Orgil
  • Kommentare: 2
HP Compaq 6710b Power Button Panel Replacement

Schwierigkeitsgrad

Moderate

Schritte

6

Zeitaufwand

5 Minuten

Einleitung

Remove the power button panel from above the keyboard.

  1. MVbTgmKNvoWfJgPR
    MVbTgmKNvoWfJgPR
    AIOWYgGP2OcHuaxZ
    yL6Rf2CymtfW2ccb

    • Turn off computer before starting.

    • Flip to the backside of the laptop.

    • Using a Phillips #1 screwdriver, unscrew the 5mm screw and take off the shown cover.

    • Using the same screwdriver, unscrew the 8mm screws.

    • The screws may not completely fall out of the laptop, just ensure they are unscrewed as far as they will go.

  2. PBfBtmpkyyOmxQwH

    • Flip over the laptop to the top side, and open the laptop.

    • Slide the locking tabs down using a blue plastic opening tool or your fingernail.

  3. D3gBr23EJkFBAmHl
    D3gBr23EJkFBAmHl
    PIiINIDGYsZF1vWq

    • Using the plastic prying tool, lift the keyboard gently towards you.

    • Don't take the keyboard completely off because it is still attached with a ribbon cable to the computer.

  4. dggcIjE4nJZB3gkk

    • Pull up on both sides of the black locking tab of the connector.

    • The keyboard should now be free of the computer.

  5. QC25fZ4dADDXKvlA

    • Put a finger under each side of the plastic lock on the ribbon cable and pull up.

    Reben pack Tut Gaya hai

    Gopal Ji -

    Reben cabal tuta huahai

    Gopal Ji -

  6. 3pl3knEBeZFpjD5x
    3pl3knEBeZFpjD5x
    lEpghLmgQhk5fYoe
    ESMna1qXerr1qOJK

    • Using a flathead screwdriver, get under each plastic hinge cover until they pop.

    • Lift the right edge of plastic strip covering the power button and gently pull it up until the whole strip comes free.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Khulan Orgil

Mitglied seit: 14/04/15

1120 Reputation

0 Kommentare