HP EliteBook 850 G3 Fan Replacement

Geschrieben von: Annabeth Grover
  • Kommentare: 0
HP EliteBook 850 G3 Fan Replacement

Schwierigkeitsgrad

Moderate

Schritte

9

Zeitaufwand

8 Minuten

Einleitung

If your HP EliteBook 850 G3 is overheating and the fan is not operating, use this guide to replace the fan. Fans are used to draw cooler air into the case from the outside, expel warm air from inside and move air across a heat sink to cool various components. When a fan is faulty the computer may overheat and perform sub-optimally, and also potentially shut down under heavy loads. Before using this guide, feel free to check out the troubleshooting page to see if any issues can be resolved without a replacement.

  1. GRAIm16tKS6UEZcs

    • Turn off your laptop before starting.

    • Flip the laptop over so the model stickers face up.

  2. Sa6vuIpFkErHyAxt
    Sa6vuIpFkErHyAxt
    L2PqeB2JaflhX4P5

    • Use a Phillips #0 screwdriver to remove eleven 5.7mm screws.

  3. apJSiTyhTUd4BZoo
    apJSiTyhTUd4BZoo
    WgDFodIZbCN4gXUL

    • Insert the iFixit opening pick underneath the plastic back of the laptop. Use force to pry the back off.

  4. nOidlUMYUlBBQawf
    nOidlUMYUlBBQawf
    1oiV4xR4eNPLfJU1

    • Use the Phillips #0 screwdriver to remove the two battery screws.

    • The two battery screws are captured screws and do not come out.

  5. dF2KpeWFwXt56OUL
    dF2KpeWFwXt56OUL
    IcNRkJSBTXZvmntj
    eEJaXPwgK6qsxUXc

    • Lift and pull the flap located at the top of the battery to remove it.

  6. iPkWIsLiQkxAvJnW

    • Gently unclip the plastic frame.

  7. JW3FGSNaKFX1BPZW
    JW3FGSNaKFX1BPZW
    n5cwXyGXoHnbMf3y
    ANiK4KWxRcRHFlo5

    • You can use a Phillips #0 screwdriver to unscrew the four captive screws located near the fan and heatsink assembly.

  8. JjKXWSYZqRLBGJAx
    JjKXWSYZqRLBGJAx
    dSts3ojbsMVreq5C

    • Carefully remove the connector for the fan.

  9. bNSx5cGhkukNp3vH
    bNSx5cGhkukNp3vH
    EpNCYoXR1UigES1V
    JNtRXNxw1DKBHydJ

    • You can now carefully remove the fan and heatsink assembly from the laptop.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Annabeth Grover

Mitglied seit: 10/10/19

914 Reputation

0 Kommentare