Einleitung

If your computer will not connect with the internet, then you may need to replace the Wi-Fi card in your computer. This is a step-by-step guide on how to replace the Wi-Fi card. In order to replace it, the back cover of the laptop must be removed to expose the screw and cables which secure the Wi-Fi card and the card itself.

Please remember to power down your computer and unplug it to avoid any power surges or shorts. Failing to power down and disconnect the power cable may result in further harm to the laptop or even yourself, so precautions must be taken.

  1. itsycJoLWUdRS6Om
    • Use a TR8 Torx screwdriver to remove:

    • Six 5.3 mm screws

    • Four 3.3 mm screws

  2. uuqUrDG2Rl6R5jHE
    • Use a nylon spudger to gently pry the lower case up and off.

  3. P2YjqMwNhdhvJvWC
    P2YjqMwNhdhvJvWC
    AAoFREZr1xXycsCM
    • Disconnect the two coaxial cables connected to the card.

    • Be sure to remember which wire is which. It is easy to get these wires mixed up.

  4. jlL5eqAcpiiyTGpZ
    • Use a Phillips #1 screwdriver to unscrew and remove the single 1.8 mm screw that secures the card to the board.

  5. EiWDXZdpsgfrxrNV
    • Lift the card slightly and then pull away from the port and remove.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Drew Borden

Mitglied seit: 22/03/22

594 Reputation

0 Kommentare