Einleitung

  1. IB3Q1ZopPnxJo6KH
    • Flip laptop over.

  2. 43UqmxRZTsxSWms1
    • In the center of the laptop slide the black piece back till it turns red indicating it is unlocked and the battery can be removed.

  3. I3nXtRGDMDuwPEXN
    I3nXtRGDMDuwPEXN
    VVWJLLytUU1kASDv
    • Remove the 2 Phillips head screws that attach the cover on the left.

  4. oMF4vOtoKfPp65sZ
    oMF4vOtoKfPp65sZ
    vllphEEcT41gEoCX
    sjQIW1oLUNLjBXR5
    • Remove the 4 Phillips screws holding the hard drive in place

    • Remove by gently prying and pulling up on the tab and out.

  5. ZiTJEhthFnSaDrEX
    ZiTJEhthFnSaDrEX
    Aj1pXpJYKGOKBPZt
    eLpGDjsTXWIfYrIp
    • Remove the 3 Phillips head screws holding the back plate in.

    • Gently pull up and out to remove plate.

  6. ZJljehGCtXnvZJlT
    ZJljehGCtXnvZJlT
    B2VjvFAVtLvoCIRp
    • Remove all eighteen screws marked M2x3 and M2x5.

    • Remove the remaining four Phillips head screws.

  7. W3TfHtG4NRTryj4n
    W3TfHtG4NRTryj4n
    xsBMyrYCZCZ3QpAW
    • Slowly pry and lift the frame up while checking for connected wires and ribbons that may be obstructing it.

  8. AQgr6KosjqsR5GRp
    AQgr6KosjqsR5GRp
    HQouUcRylQ6aEWeA
    • Detach ribbon wires by gently lifting the grey flap and pulling them out.

    • Do not pull hard on the wires.

    • Push the track pad from the bottom and it should come right out.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Kenneth Bowers

Mitglied seit: 08/04/16

1345 Reputation

0 Kommentare