HP Envy 17-3070NR Wireless Card Replacement

Geschrieben von: Jasper Lewin
  • Kommentare: 0
HP Envy 17-3070NR Wireless Card Replacement

Schwierigkeitsgrad

Easy

Schritte

4

Zeitaufwand

5 - 10 Minuten

Einleitung

A wireless card gives your laptop access to the internet, therefore it is one of the most important components for many. If the wireless card fails use this guide to replace it in your HP Envy 17-3070NR.

  1. QsKnyogwUQGXdFyg
    QsKnyogwUQGXdFyg
    dPwl4kaZAZU4De4v

    • Before you begin taking apart the computer, make sure that it is completely powered off.

    • Slide the release latch away from the nearest edge.

    • Slide the back cover off of the computer.

  2. gQSHeYHLaYFvUdQv
    gQSHeYHLaYFvUdQv
    RENSYWZJDLAURVpG
    k5OB56NDZhjJNcBV

    • Remove the six 3.7mm Phillips screws.

    • Slide the back cover until it clicks, then lift it straight off.

  3. u3BHorwEQ33akMZR
    u3BHorwEQ33akMZR
    2TugGeEsYWOs6IYY
    2nZEtbASkfgymrkJ

    • Unscrew 4.5mm Phillips screw.

    • Unplug both antenna connectors by carefully pulling them upwards.

    • During re-assembly make sure to match numbers(1 or 2) on the antenna cable and the wireless card.

  4. JDBsLENUvhMeowkw
    JDBsLENUvhMeowkw
    lGQJOGO5JbsZFZy6
    QTSkPQPIZhxnTXB6

    • Pull wireless card up and away from you.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Jasper Lewin

Mitglied seit: 21/04/15

748 Reputation

0 Kommentare