HP Envy 4-1105dx Battery Replacement

Geschrieben von: Parvathy Nambidi
  • Kommentare: 1
HP Envy 4-1105dx Battery Replacement

Schwierigkeitsgrad

Moderate

Schritte

8

Zeitaufwand

10 Minuten

Einleitung

Use this guide to give a new lease on life to your HP device by replacing the battery. If the battery does not charge past a low level or shuts down unexpectedly, it may be time to replace it. This guide provides detailed instructions for removing the battery from your device.

  1. eI12hYstxssOBymg

    • Power off the device before beginning disassembly. Disconnect all external devices.

    • Flip the device on its back.

  2. 44HfElHIyjBHKiDH

    • Unscrew and remove the one 7.5 mm Phillips-head screw using Phillips #1 screwdriver.

  3. wkMaSxtTwOJbjoEW

    • Unscrew twelve 6.0 mm Phillips-head screws using Phillips #1 screwdriver.

  4. K2TsKvA1sPCNcR1e

    • Use the plastic opening tool (which is short and has a thin end for prying open device parts) to pry open the back case of the device.

  5. 2xsNmvGynSJfEXhO

    • Once the device is open, move the ribbon cable to the side.

  6. qcgdCJtBRPhPF2RK

    • Use the flat end of a plastic spudger to disconnect the battery cable from its socket in the motherboard.

  7. ZfJdvWvBskgkopEk

    • Unscrew and remove the three 4.0 mm Phillips-head screws that hold the battery in place, using a Phillips #1 screwdriver.

  8. iVoQXS51dDMSiEYS

    • Lift the battery up and remove.

    • Removing the battery can dislodge the touchpad bracket. Place the battery carefully over the alignment pins.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Parvathy Nambidi

Mitglied seit: 18/05/17

298 Reputation

Ein Kommentar

Worked very well, many thanks

Tony Chan -