HP Envy Sleekbook m6-k010dx LCD Replacement

Geschrieben von: codi whittaker
  • Kommentare: 0
HP Envy Sleekbook m6-k010dx LCD Replacement

Schwierigkeitsgrad

Moderate

Schritte

11

Zeitaufwand

10 Minuten

Einleitung

If your computer turns on but nothing is displayed on the LCD, it might be time to replace it. This guide will walk you through each step.

  1. wt1YLdi5AYTgR3Re

    • Remove the twelve 9 mm Phillips #00 screws.

  2. aUeMQh3TCZGD5ZIw
    aUeMQh3TCZGD5ZIw
    wyXhLn3rsqgZj6qg

    • Use the plastic opening tool and your hands to remove the bottom cover.

  3. G3CVyxbBWjKJDdex

    • Disconnect the battery power cable from the motherboard.

  4. kSeWJ2JJLcLPvoGs

    • Remove the six 6 mm Phillips #00 screws from the battery.

  5. 4K6wuB22khq1NxDV
    4K6wuB22khq1NxDV
    mCxNrDVjDhFELx5P

    • Lift the battery out of the laptop.

  6. EB3TvkVMBEx55LVS
    EB3TvkVMBEx55LVS
    rhXfvhuc1LpPQOxB

    • Remove the stickers from the bottom left and right corner of the device with a plastic opening tool.

  7. qZKKYBjKIwmI4KDn

    • Remove the two 2.5mm Phillips #00 screws found underneath the previously removed stickers.

  8. txoTXO23v1KaK1GZ
    txoTXO23v1KaK1GZ
    JhoBX44LRCiTjlcE
    EjRhjPZd16xWLmMZ

    • Use the plastic opening tool to pry the bezel free from the LCD housing.

  9. a4CiWGaVclbLDkDI
    a4CiWGaVclbLDkDI
    PV6uYUjhWuVkEjGn

    • Remove the four 2.5mm Phillips #00 screws located in each corner of the LCD screen.

  10. KGnESsEYTVxQPyZu
    KGnESsEYTVxQPyZu
    4m61CFUVqAIg5daF

    • Use the plastic opening tool to remove the LCD screen from its housing.

    • Lay the LCD screen flat on the keyboard.

  11. rCujxVt5R6pkssfn

    • Disconnect the cable which connects the LCD to the motherboard.

    • Pul the LCD screen out.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

codi whittaker

Mitglied seit: 14/02/18

508 Reputation

0 Kommentare