HP Envy m6-k015dx Touchpad Replacement

Shut down the computer

Remove all external devices

Unplug the AC adapter

Close the computer

Turn it upside down

Remove the 12 screws from the bottom.

Gently remove the service cover

Disconnect the battery cable from the motherboard.

Remove the 4 screws that hold the battery.

Gently lift the battery out of the computer.

Remove the fan cable

Remove the 2 screws around the fan

Lift the fan up

Unscrew the 3 screws that hold the card reader board to the system

Raise the card reader board from the system

Remove the four screws that pin down the hard drive

Disconnect the harddrive from its connector

Remove the harddrive

Only complete this step if your computer model has a solid state drive

Remove the two screws at the top of the solid state drive

Remove the solid state drive

Remove the thirteen screws around the keyboard bracket

Gently remove the keyboard bracket from its top

Remove the 4 screws on the touchpad's board

Gently lift the touchpad board from the side that the screws were on

Remove the touchpad board