HP Envy x360 m6-aq005dx Fan Replacement

Geschrieben von: Matthew Martin
  • Kommentare: 0
HP Envy x360 m6-aq005dx Fan Replacement

Schwierigkeitsgrad

Moderate

Schritte

8

Zeitaufwand

5 Minuten

Einleitung

The fan is the main source of cooling for the laptop. It is the component that keeps your device from overheating, and can be the main source of noise from the laptop. This guide will show the proper removal of the laptop's hard drive.

  1. IgfHOg1jqgWInLws
    IgfHOg1jqgWInLws
    neeGsuHsCbpJVsiG

    • Use the plastic opening tool to remove the gray rubber pads on the bottom of the laptop. For our device we only needed to remove the two at the top.

  2. FGx1VOQLPtVC1rDw
    FGx1VOQLPtVC1rDw
    HYdHiNQG3gyenjf6
    QhBhQDO1hu2EQHjL

    • Use a Torx T5 screwdriver to remove the six 5.1 mm screws.

    • Use a JIS #1 screwdriver to remove the two 7.2mm screws.

  3. cUEJIBHUmU5uQvVT

    • Use a plastic opening tool to pry open the case. Go slowly around the edge. You will hear popping noises, such are due to popping open the small joints that keep the cover attached.

  4. xrd4Txs2F2BMIVTG
    xrd4Txs2F2BMIVTG
    yAVZH1ZnF3SGmtgQ

    • Use a JIS #1 screwdriver to remove the six 4.7 mm screws.

  5. WaNDUASsASMBd5fV

    • Battery might cause a small electric shock.

    • Use tweezers to disconnect the battery from the motherboard.

  6. xBuKSrsxMwdoWPNt

    • Use the plastic opening tool to disconnect the power cable from the fan.

  7. CQTlfek3262mv5bn
    CQTlfek3262mv5bn
    jL3qNMdtHeyofnJv

    • Use your fingers to lightly pull the cable and disconnect it from the motherboard.

  8. ZNbQyfpNHgDWtH65
    ZNbQyfpNHgDWtH65
    ZEe5hk6OQWfjOtgk
    PISQQ1KVr1FqSUOO

    • Use a Phillips #0 screwdriver to loosen the four 6.5 mm screws.

    • Do not fully remove the screws, just enough to be unattached from the motherboard.

    • Use a JIS #1 screwdriver to remove the two 7.7 mm screws.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Matthew Martin

Mitglied seit: 10/10/17

711 Reputation

0 Kommentare