HP G60T-600 CTO Keyboard Replacement

Geschrieben von: Dominic DeSantis
  • Kommentare: 0
HP G60T-600 CTO Keyboard Replacement

Schwierigkeitsgrad

Moderate

Schritte

7

Zeitaufwand

20 - 35 Minuten

Einleitung

If you have a broken or malfunctioning keyboard on the device, this is your guide.

  1. WKJDOVgD4QJtKUmQ

    • Failure to remove the battery before performing any replacement guide may result in electric shock.

    • Close your device, then turn it over.

  2. 43BF4rpJoJKSEVpX
    43BF4rpJoJKSEVpX
    oWU51ZYDvlIJRavY

    • Place your index finger on the ridged tab.

  3. kGpWJjcSFT5LchrL

    • Apply moderate pressure to the tab and slide it to the right.

    • While the tab is on the right, you should be able to gently slide your battery out of your device.

  4. WDYaGfqWUWDfcOMb
    WDYaGfqWUWDfcOMb
    AWBviRWswPFvRKiG

    • Unscrew the following 5mm screws with a #0 Phillips screwdriver.

  5. 1X5XQBiou3nHH1lF

    • Turn your laptop over and open it up.

    • Grip your laptop firmly from both sides and use your thumbs to slide the keyboard towards the screen.

  6. BIiVhxRC6d3vTDFS

    • Pull up on the top of your keyboard with medium force. It should start to pop out.

    • A plastic opening tool may facilitate this task.

    • Run your hands underneath the edges of the keyboard until it is free from the device.

    • Do not pull hard to take the keyboard out. There is a small connection that needs to be undone.

  7. EDih5bEmmWLHhD3S
    EDih5bEmmWLHhD3S
    2aRNCQEOxdXdMRir

    • Place your thumbs on the two small, white tabs.

    • Push these tabs forward to release the connection and free the keyboard from the device.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Dominic DeSantis

Mitglied seit: 19/10/16

748 Reputation

0 Kommentare