Einleitung

  1. kKVurLPrTLUC4FnI
    • Turn the device over so that the bottom side is facing up and the battery is facing away from you.

  2. MnZS4Fx1CsCcFpCg
    MnZS4Fx1CsCcFpCg
    XtubC266E5islHRL
    yDg1KgGhJciHrUaU
    • Locate the slider under the right side of the battery.

    • Using your thumb, slide it all the way to the left until the front of the battery lifts up.

  3. hAE4BZjL4aRIBLrB
    • With your thumb still holding the slider to the left, use the opposite hand to lift the battery out, removing it from the computer.

  4. OZNmEarNZnInPK1u
    • Remove the three 4mm screws using Phillips #1 screw driver.

    • Remove the four 6mm screws using Phillips #1 screw driver.

    • Remove the two 3mm screws using Phillips #1 screw driver.

  5. PEwd2HuokYIIoFFC
    • Using your fingers, pry off the speaker cover.

  6. 4CVtYkLDjcWraLZW
    4CVtYkLDjcWraLZW
    HFRvQ2NGRUBGL1AT
    CXhiBvxssX4HfKXy
    • Use the plastic opener to pry up the chrome keyboard cover from the lab top itself. Carefully work around the edges by prying each snap individually.

    • Remove the chrome keyboard cover.

    • Be careful not to pull the chrome cover completely off because there is a black strip connecting it to the laptop itself.

  7. YhSLRukyHwjAj6Nx
    YhSLRukyHwjAj6Nx
    vlxEgBVFmTlGTBRR
    1xPMqSIlwARMKCED
    • Locate and remove the two 4mm screws with the Phillips #1 screw driver.

  8. qbZQRUEPsyYRcOFC
    qbZQRUEPsyYRcOFC
    LKhXYLoKEP4uGNMV
    • Using your hands, pull the keyboard out.

    • Do not pull completely off because there is a grey strip connecting it to the laptop itself.

  9. t5OJqeTXBZQYAERJ
    t5OJqeTXBZQYAERJ
    vOesH3okB13cSnWn
    • Lift the black tab using the plastic opening tool.

    • Gently pull the grey strip out, horizontally way from you. This will release the keyboard from the computer.

  10. 1WibTSiLWRjPmE2a
    • Use the Phillips #1 Screw Driver to unscrew the 5mm screw.

  11. P3bLkj6qwgOSPl52
    • Flip over the device so that the bottom side is facing up.

    • Use the Phillips #1 Screw Driver to unscrew the 7mm screw near the center of the device.

  12. PZOgvd3GYemYFT6O
    • Push down and pull out the DVD on the left side of the device.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Marshall Reid

Mitglied seit: 14/04/14

527 Reputation

0 Kommentare