HP Officejet Pro 8600 Plus Power Source Adapter Replacement

Geschrieben von: Karissa Roof
  • Kommentare: 4
HP Officejet Pro 8600 Plus Power Source Adapter Replacement

Schwierigkeitsgrad

Difficult

Schritte

10

Zeitaufwand

25 Minuten

Einleitung

The Power Source Adapter on the HP Officejet Pro 8600 plus may have connection issues after wear and repeated use. This guide describes how to replace the Power Source Adapter.

  1. QXW6ppI3JPSQwBKM
    QXW6ppI3JPSQwBKM
    JfpFFr2iMXUNgWBq

    • Turn the printer so the back is facing you.

    • Put the printer in a vertical position by lifting its right side.

  2. u1l16vEMDy3r2CNg

    • Remove the two 12mm-T10 Torx screws on the top edge of the printer.

    This repair guide works for other Officejets like the Officejet Pro 8715 as well.

    Difference is a third screw on the front that needs to be removed.

    Bernhard Keim -

  3. QAUwXWKx4KgteqbC

    • Rotate the printer clockwise so the bottom of the printer is facing you.

  4. OsKTXadaBWd2Vvug
    OsKTXadaBWd2Vvug
    vSTlXvpRvnmAlvah

    • Insert the plastic opening tool underneath the slot on the right that aligns with the edge of the back panel.

    • Insert a second plastic opening tool in the notch lining up with the crease in the back panel.

    • This step requires applying a significant amount of force on the left notch. Don't be alarmed if you hear popping noises.

  5. O3WPaPGpsJQLDYWc

    • Remove the side panel from the printer by lifting upwards toward you.

    • For reassembly, slide the side panel from left to right into place.

  6. fDuPEOyHBLkD3ZF2
    fDuPEOyHBLkD3ZF2
    lTaiVqNTM1YnhBp6
    xLUtjhQcYMSmMNCo

    • Rotate the printer to its standard position.

  7. AVytMQrVCxshABe1
    AVytMQrVCxshABe1
    TNMan1HpSpCvgIqJ
    ZHNZHLhFXWp5ICq3

    • Unplug the black wire with the white cap connecting the power supply to the motherboard.

  8. KshpEo3J5KK6xNPa

    • Remove the two 12mm-T10 Torx screws from the base of the power supply mount.

  9. YsWRgn5u4BAFTExm
    YsWRgn5u4BAFTExm
    Vd63OvHxrErpiCuC

    • Place your left hand on the left side of the power supply through the opening in the side of the printer.

  10. kIDfHTIqFmtgF26Q
    kIDfHTIqFmtgF26Q
    XQbeRmKX6HjwoyDJ
    iujQKtYShRUwu5Mv

    • Grab the base of the cable on the right side of the power supply with your right hand.

    • Remove the power supply by pulling your right hand toward you and pushing your left fingers toward you.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Karissa Roof

Mitglied seit: 18/04/18

220 Reputation

3 Kommentare

I have used this guide to replace the power supply for my Officejet 8715. The only difference is a third screw that needs to be removed to take the cover off.

This is an easy repair.

The real challenge is to find the right replacement part. The power supply is used in various models.

The OEM Number of the power supply is E3E01-60132

I have paid for this spare part less than 30€. Worthwhile as a new printer costs around 300€.

Bernhard Keim -

Does the 8600 P/S fit on the 8620? If not, what is part nr for 8620?

albert venter -

Un peu galère dommage que j'ai pas trouvé se blog avant car a par les visse chiant à défaire c'est bien expliquer après essai du fusibles en porcelaine jus arrive et rien derrière donc merci

coin coin lecanard -