HP Omen 15-5002xx Motherboard Replacement

Geschrieben von: Eduardo Arellano
  • Kommentare: 0
HP Omen 15-5002xx Motherboard Replacement

Schwierigkeitsgrad

Moderate

Schritte

10

Zeitaufwand

45 Minuten - 1 Stunde

Einleitung

Follow this guide to replace the motherboard of your HP Omen 15-5002xx gaming laptop.

Before beginning this repair, be sure to power off your device and unplug it from external power.

  1. uVHsDJpukL3LYh4N
    uVHsDJpukL3LYh4N
    OrvHdDeNYOgPDCE2

    • Flip the laptop upside down so the backside is facing up.

    • Use a spudger or your fingers to remove the thin rubber strips that are attached from the edges of the laptop.

    • Remember where each thin rubber came from and set them off to the side.

    • Unscrew all 14 screw with the J00 JIS Screwdriver.

  2. NGEGyWE6rQYvUFqC

    • Open the case slowly from opposite sides of the laptop.

    • Use the J00 JIS screwdriver to remove eight screws securing the battery.

  3. DmZxIAja3WDYtEO4
    DmZxIAja3WDYtEO4
    IWypWhgKpovgfwW2

    • Carefully remove the battery connector that is attached to the motherboard by slowly sliding it towards the battery with two fingers.

    • Remove the battery by lifting it up and out.

  4. IRWOlLOscOIcRhYP

    • Remove the twelve big screws with the J00 JIS screwdriver.

    • Remove all eight small screws with the 1.5 flathead screwdriver.

  5. jPOkrqBJw3oGLymd
    jPOkrqBJw3oGLymd
    bKJKoRI1BrVGvQgL

    • Carefully detach the fan connector that is attached to the motherboard by slowly sliding the connector out with two fingers.

    • Remove the battery carefully.

  6. earVMuOeBELeFmdh

    • Use the Phillips #00 to remove one screw securing the Wi-Fi Card.

  7. KLCVGeRMNq5lrFbJ

    • Carefully remove the Wi-Fi Card by slowly sliding the card sideways away from the motherboard.

  8. POHPvkFvOuI4GPxA

    • Use the 1.5 flathead screwdriver and remove the twelve screws from the motherboard.

  9. TP2hGQXGI3FoE3LG
    TP2hGQXGI3FoE3LG
    LMXdZSuUydJfCQEC
    j4DnV5PQPkAE5FaF

    • Disconnect the four cables attached to the motherboard.

  10. eJUFCXwrmTTyMKV6
    eJUFCXwrmTTyMKV6
    HMDEBKGHReURfqm6

    • Disconnect the remaining four connectors from the motherboard.

    • Remove the motherboard.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Eduardo Arellano

Mitglied seit: 01/09/21

621 Reputation

0 Kommentare