Einleitung

This guide is used for a battery replacement for the HP Pavilion 13-s128nr. The HP Pavilion 13-s128nr is also known as the HP Pavilion x360. A faulty battery will cause the laptop to not work properly. Use this troubleshooting page to know if the battery needs to be replaced. Before beginning this guide, make sure the laptop is powered off.

  1. HLIUxI6nBWBLv1dC
    HLIUxI6nBWBLv1dC
    POCjV4tTVMY3DKRC
    • Use the iFixit opening tool to take off the rubber caps.

    • Remove the screws using the Phillips #0 screwdriver.

  2. g62kCiMHOGCvbKXy
    • Use the Jimmy to pry around the seam of the laptop.

    • Remove the back panel of the laptop.

    • Don't completely remove the back panel as there are ribbon cables that can be easily damaged if removed quickly.

  3. nSKCjl33rSfUdf1j
    nSKCjl33rSfUdf1j
    qCkLCwqmF1dTKFaI
    • Using the iFixit opening tool to lift the tabs holding in the cables connecting the keyboard to the motherboard.

    • Pull the cable from the motherboard.

  4. oTIBWdfA1BJkBJh3
    oTIBWdfA1BJkBJh3
    1Pg3eABGncQ4DhQZ
    • Lift upwards on the black tabs the purple strip is connected to.

    • Gently pull the purple strip out of its place.

  5. kMrJUPTACKmdLLBp
    • Using the Phillips #0 screwdriver, remove the five screws holding the battery in place.

  6. qWIbGBfmKxQv2mud
    • Pull the white cable connected to the motherboard out using the iFixit opening tool.

  7. qBZyhlOCd43CfK3I
    • Remove the battery.

    • There are little snap tabs on the right side of the battery. Be sure not to break them by pulling the battery out towards the left side.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Sydney Bell

Mitglied seit: 13/02/20

317 Reputation

0 Kommentare