HP Pavilion 15-AB153NR Bottom Case Cover Replacement

Geschrieben von: Nicole Vachon
  • Kommentare: 0
HP Pavilion 15-AB153NR Bottom Case Cover Replacement

Schwierigkeitsgrad

Moderate

Schritte

14

Zeitaufwand

10 Minuten

Einleitung

This replacement will require the use of prying tools. This can be competed in a moderate amount of time with little time. You will need a clear work surface. Replacing the back panel solves vanity issues.

  1. yPgrmVdhoS2csD5X

    • Ensure computer is turned off and unplugged.

    • Slide the battery lock latch on the left to unlock. Slide from left to right to unlock.

  2. KvIioudWPTmiyxpZ
    KvIioudWPTmiyxpZ
    FPr4IvpAnZChU1oy

    • Slide the battery release latch on the right with continuous force from right to left.

    • Once battery pops, you may release latch.

  3. mvt5CNTLcdtEKVhR
    mvt5CNTLcdtEKVhR
    YXsJFgTMEECBu2Sk

    • Grab the battery, rotating upwards and away from you. This will remove the battery.

  4. 3pAeaPSSXYbSPxS5

    • Make sure computer is powered off and unplugged.

    • Flip computer over so that the bottom is facing the ceiling and the hinges are farthest from you.

  5. cDwZlEqAaHf53Fwk

    • Using the Phillips #000 screwdriver, remove the 7 mm screw on the middle right.

    • There is an icon that looks like a CD stamped into the back panel near this screw.

  6. wnqwZuRBWJydwXo3
    wnqwZuRBWJydwXo3
    QRIqweaYj2rUV4LK

    • Slide the drive out from the right side of the device.

  7. 5N64pQ1WrV2SxNcM

    • Using the Phillips #1 screwdriver, remove the two 12mm screws located on the hinge covers.

  8. nTBbUXRyTplOZM23
    nTBbUXRyTplOZM23
    1Ai2UKPA5qqOWWfE

    • Lift the corner covers off of the computer using a prying tool.

  9. GlxZyOeWngJNiZEj

    • Remove the six 6.5mm screws using a Phillips #1 screwdriver that are located near the top of the laptop.

  10. 2o5AZU5kHY1eQrXD

    • Remove the remaining seven 6.5mm screws using a Phillips #1 screwdriver that are securing the back cover.

  11. j2bqEIqQZcHO2YjE

    • Use the Phillips #0 screwdriver to remove the two 2mm screws.

  12. sW2GFaYuOsUH6dDA
    sW2GFaYuOsUH6dDA
    kOeKZ5ZlTOdkIETh
    k3bkTsWEFw5PEPAJ

    • Use prying tools to pry the covers off of the screwholes.

    • Using the Phillips #1 screwdriver, remove the two 6.5mm screws.

  13. S1SbIvYTERo4xWbB

    • Be mindful of sharp edges on computer while using prying tools.

    • Flip computer over and open so that the screen is facing you.

    • Starting at the bottom right corner, insert the prying tool and lift upwards to loosen the back panel.

    • Continue down all sides and corners of the device.

  14. ixgHvTgVHWEh5AEi
    ixgHvTgVHWEh5AEi
    xkWZi6tdnEDNdCqb

    • Flip laptop back over so that the bottom is facing up

    • After all sides are loosened, remove the back panel from the device.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Nicole Vachon

Mitglied seit: 21/03/19

902 Reputation

0 Kommentare