Einleitung
If your keyboard no longer works on your HP Pavilion 15-p046nr, you’ve come to the right place. This guide will walk you through how to replace your notebook’s keyboard. You may need to change your keyboard if the keys no longer respond on your keyboard. You will need a magnetic project mat, Phillips 00 screwdriver, and plastic opening tool for this replacement. Before you get started, be sure to completely disconnect power from your device.
-
-
Flip the laptop over so the bottom is facing up.
-
Place your finger on the top left-hand slide button with the lock symbol.
-
Slide the button to the right so that an unlocked symbol is visible.
-
-
-
Place your finger or thumb on the top right-hand slide with the battery symbol visible.
-
Slide the button to the left.
-
Lift the battery off the computer with your thumb.
-
-
-
Remove screw covers from the hinge covers on the upper left and right side.
-
Unscrew one 7 mm screw from each hinge cover using the Phillips #00 screwdriver.
-
Remove hinge covers by pulling up and out on the top of the cover.
-
-
-
Remove thirteen 7 mm screws from the back panel using the Phillips #00 screwdriver.
-
Remove three 5 mm screws from the back panel using the Phillips #00 screwdriver.
-
Grab the disk drive on the left side and pull the disk drive out completely.
-
Flip the laptop over and open the display.
-
-
-
Run the plastic opening tool along the entire edge of the keyboard to separate the keyboard from the base of the laptop.
-
Gently lift the keyboard tray up.
-
-
-
Use the tip of the blue plastic opening tool to gently flip-up the grey locking flap of the two ribbon cables connecting the keyboard to the device.
-
Grab the ribbon cable and gently pull away from the socket.
-
To reassemble your device, follow these instructions in reverse order.
