Einleitung
The wireless card is what allows you to connect to the internet. It is a small component, but is still very important. This guide will show you how to replace it.
Werkzeuge
-
-
Press and hold the release switch, and then slide the battery out. Insert the new battery into the slot and you're done!
-
-
-
In the battery compartment, find the phillips screw that is holding the rear panel onto the computer. Unscrew it.
-
With the battery compartment closest to you, push the panel away from you. Once it slides back until it stops, gently lift it and put it to the side.
-
Please note that this particular screw does not completely come out, it stays with the rear panel and that is ok.
-
-
-
Undo the two clips attached to the wifi chip by pulling up gently with a pair of tweezers.
-
Unscrew the 9mm phillips screw holding the wifi chip in place.
-
Gently remove the wifi chip from its socket and place it to the side.
-
To reassemble your device, follow these instructions in reverse order.
